找回密码
 注-册

手机短信,快捷登录

微信扫一扫,快捷登录!

搜索

brd文件导入ICEPAK出现的error,已解决!

本帖最后由 小家2004 于 2020-10-30 16:59 编辑

1. 我使用的软件是ansys 19.0里的icepak,硬件工程师使用的是Cadence17.2,
在BLOCKS的ECAD geometry中,我将brd格式的文件导入ICEPAK,出现以下警告,

警告说是 "could not find application extracta.exe "
但是我在D:\Cadence\SPB_17.2\tools\bin  发现有extracta.exe,请问怎么解决?

2. 在E:\product\F4280R\F4280R_icepak\F4280R_icepak_files\dp0\IPK\Icepak\IcepakProj 里有个文件import_log
里面内容如下:
Icepak version: 19.0
ECAD Import version: R19.0_58da73b Aug 14 2017
Import filename: E:/product/F4280R/F4280R_icepak/f5280r_am1a_080218.brd
Check out license for Icepak
Begin ECAD conversion...
Set ECADTranslator paths...
Converting Cadence to EDB...
Copying file E:/product/F4280R/F4280R_icepak/f5280r_am1a_080218.brd to C:\Users\Home\AppData\Local\Temp\f5280r_am1a_080218.brd
Creating control file...
Finished created control file
EDB directory: C:\Users\Home\AppData\Local\Temp\af69-383f-39a9-da3d.aedb
Import Error: Could not create EDB directory
Import Error: Error converting Cadence to EDB
Import Error: extract(a) executable not found
Warning: Could not extract Cadence diestack information

Check in license for Icepak

这个error提示了什么,怎么解决?


参考《ANSYS Icepak Users Guide》6.6.2. Importing Trace Files,必须安装Cadence Allegro,并且按照以下要求设置环境变量。

Note
• BRD/MCM import uses your Cadence installation and accesses local environment variables that
were automatically set during the Cadence installation. If you are accessing Cadence across your
network instead of locally, you will need to set additional environment variables. For example,
if your Cadence installation is located in the mapped network location V:\SPB_16.6, add the following variables:
set CDSROOT=V:\SPB_16.6
set CHDL_LIB_INST_DIR=V:\SPB_16.6
set PATH=%PATH%;V:\SPB_16.6\tools\pcb\bin;V:\SPB_16.6\tools\bin
• On Linux, you must include the following paths to the Cadence software in your search paths:
your_Cadence_install_dir/tools/bin
your_Cadence_install_dir/tools/pcb/bin
Refer to the Cadence Installation Guide for more details.
• Cadence, ODB++, and binary ANF import require the installation of ECADTranslators.
• When you import traces using option 2, the board has to be first imported in the XY plane. All
subsequent transformations (translation, rotation or mirroring) of the board can then be started
from the default XY plane. When you import traces using option 1, the board can be imported
in any of the three planes: XY, YZ, or XZ. The board can then be translated, rotated or mirrored
similar to the previous case.

QQ: 327980090
微信: xioajia2004

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注-册

x
  [热设计论坛版规] [增加积分的方法] [中国热设计网 QQ群号: 103443015加群验证:工作城市-论坛会员名]

大神点评12

dengjie0 2019-1-31 17:12:06 显示全部楼层
如果是要导入BRD的trace信息。需要你的电脑也安装allegro才可以,不然导入时无法对brd文件进行转换。
Adley_Fang 2018-9-13 11:37:11 显示全部楼层
我也遇到了相同的问题。。。
vin 2018-10-15 14:38:16 显示全部楼层
我当初也碰到过这样的问题,然后就把各个格式都试了一遍,发现就IDF能行。楼主要是没有解决这个问题,然后又比较急的话可以试试这个方法。
sunmoon 2018-10-23 18:40:16 显示全部楼层
我们硬件是奥腾导出来的 brd pro 然后icepak中 点击  import--IDF file --new   没有问题。你可以试试
shiguojin27 2019-3-13 13:52:22 显示全部楼层
请问楼主这个问题解决了么?还有我们输入的铜的质量分数,每层铜的质量占什么总质量的质量分数,是和FR4的质量比例么
dengjie0 2019-3-13 17:36:57 显示全部楼层
icepak 19好像确认有这个问题,我电脑上之前用16是OK的,现在换了icepak19就无法导入brd了。
 楼主| 小家2004 2019-5-14 16:16:23 显示全部楼层
参考《ANSYS Icepak Users Guide》6.6.2. Importing Trace Files,必须安装Cadence Allegro,并且按照以下要求设置环境变量。

Note
• BRD/MCM import uses your Cadence installation and accesses local environment variables that
were automatically set during the Cadence installation. If you are accessing Cadence across your
network instead of locally, you will need to set additional environment variables. For example,
if your Cadence installation is located in the mapped network location V:\SPB_16.6, add the following variables:
set CDSROOT=V:\SPB_16.6
set CHDL_LIB_INST_DIR=V:\SPB_16.6
set PATH=%PATH%;V:\SPB_16.6\tools\pcb\bin;V:\SPB_16.6\tools\bin
• On Linux, you must include the following paths to the Cadence software in your search paths:
your_Cadence_install_dir/tools/bin
your_Cadence_install_dir/tools/pcb/bin
Refer to the Cadence Installation Guide for more details.
• Cadence, ODB++, and binary ANF import require the installation of ECADTranslators.
• When you import traces using option 2, the board has to be first imported in the XY plane. All
subsequent transformations (translation, rotation or mirroring) of the board can then be started
from the default XY plane. When you import traces using option 1, the board can be imported
in any of the three planes: XY, YZ, or XZ. The board can then be translated, rotated or mirrored
similar to the previous case.

QQ: 327980090
微信: xioajia2004
Hooks 2020-2-27 09:51:19 手机版 显示全部楼层
5楼大哥,我这边安装了allegro,但是还是存在转换问题,是缺少插件吗?
安彬 2020-4-1 21:25:15 显示全部楼层
我今天刚遇到这个问题,我怀疑是brd文件被加密软件加密了。不光这个,DM中导入step文件,如果加密了的话,也是出错的。导入没有加密的brd和step 不存在这个问题
您需要登录后才可以回帖 登录 | 注-册